Bearings Plastic or Plastic bearings. It can withstand high temperatures and heavy at high speed. The bottom of the plastic bearing some of the other benefits.

Plastic bearings, in many cases, can lead to degrees of freedom from maintenance. Resistance to chemicals to do the bearings Set It and Forget solution dirt, dust and plastic. Plastic bearings, you can be able to reduce the cost of up to 25% of the low coefficient of friction and high wear resistance, replacing the more expensive alternative, in many applications. Plastic bearings, usually you do not need lubrication unless the steel ball used in the competition with the plastic. Plastic bearings are designed to maintain a low coefficient of friction on the life of the bearing. Compared to bearing steel can become many times and the length of the hole, the coefficient of friction, bearings, plastic,. Bearings and plastic, without compromising performance, can be used to wash the salt water and harsh chemicals. Even water, can be considered as plastic lubricants, bearings.

 

OUR THERMOPLASTIC

BEARING HOUSINGS

Are made of a high PBT grade and

are completely compatible with

standard cast iron housings.

Our housings do not need

maintenance. They have an excellent

mechanical resistance, hardness, and

dimensional stability as they can never

become rust.

OUR THERMOPLASTIC HOUSINGS

include a solid insert which is

increasing its resistance and

standardize them with the stainless

steel inserts, reaching a higher

resistance.

Units are available with optional

covers, seals and solid base to add

more protection and avoiding

contamination obstructing.

You can be sure that our housings

resist the hardest applications. These

housings are designed to work under

extremely severe humidity conditions,

and temperatures from -35ºC to

+102ºC. They’ve a high coefficient of

breaking resistance (ASTM 0630) and

unsurpassable 17,300 PSI.

HIGHER PRESSURE CAPACITY

THAN ANY OTHER BEARING

HOUSINGS!

Our resistance coefficient to pressure

is a 25% higher than any other

bearings. This capacity to carry a

bigger load comes up with a longer

life expectation for the bearing. As a

result, you benefit from a high capacity

and with the benefit of a longer life for

the bearing.

SOLID BOTTOM

Its solid base avoids pollution to enter

into the bottom of the housing.

There’s no way for dirtiness, rust or

germs to accumulate, as its surface

is plain.

FROM 20 mm to 40 mm

All our housings are available

indifferent diameters from 20 mm to

40 mm.

THE SOLID INSERTS AT OUR

THERMOPLASTIC HOUSINGS ARE

UNEQUALLED!

Our insert in one piece is made of

stainless steel has reinforced the

tension points and is designed for an

optimal resistance to corrosion.

We are giving solutions to food and

beverage applications, and also to all

those applications submerged with

composed housings, assembled and

linked, whose result is an improvement

at a competitive level.

This is the reason why our housings

are designed to cover all your

important engineering requirements

for:

-Frequent immersions

-Rust resistance

-Food and contaminant liquids

resistance

-Exposure to rough chemical

components

-Exposure to a high level of humidity

-Built-in greaser

And with our housings you have the

possibility to choose the most

adequate combination to your working

needs.

SOLID BASE!

Look and check the quality difference.

The solid interior of our thermoplastic

pieces avoids breaking when cleaning

by steam or pressure washings.

SOLID STAINLESS STEEL

BUSHINGS WITHOUT WASHERS!

Just compare our solid and massive

stainless steel bushing mounted on

thermoplastic housings that reinforce

the tension points and are designed

to improve the units with visible

gaskets offering an small protection

against corrosion.